More Views

NGEN_FLEX DARK GRAY

nGen_FLEX is available for pre-ordering. Shipping will commence next week.



nGen_flex dark gray.



nGen_FLEX is best described as a semi-flexible material with good printability on most 3D printers eliminating the use for specialized flex extruders. It’s rated at a Shore A hardness level of 95. By adjusting infill and perimeter settings it’s possible to influence how flexible a part should feel after printing.


nGen_FLEX is processed at 240C/260C on most 3D printers.


! For best adhesion to the buildplate we highly recommend to use a buildTak plate. More information on printing nGen_FLEX material can be found: ngen-flex.colorFabb.com/how

Only 123 left
 
Product Name Qty
NGEN_FLEX DARK GRAY 1.75 / 650 117
NGEN_FLEX DARK GRAY 2.85 / 650 6

Availability: In stock

€39.95
  • Buy 4 for €35.96 each and save 10%
  • Buy 8 for €33.96 each and save 15%

* Required Fields

More Fabulous Colors
Details
Details

nGen_flex dark gray.

nGen_FLEX is a new elastomer material added to our existing range of co-polyester functional 3D printing filaments.

nGen-FLEX is best described as a semi-flexible material with good printability on most 3D printers eliminating the use for specialized flex extruders. It’s rated at a Shore A hardness level of 95.. Of course the user can influence how flexible a print should feel by adjusting infill and perimeter settings.

nGen_FLEX is an engineering-grade material that demonstrates excellent durability, toughness and great layer-to-layer adhesion.

What makes nGen_FLEX standout from other semi-flexible materials is the great chemical resistance and temperature resistance of up to 121C. Enabling parts to be steam sterilized at 123C cycle.

! For best adhesion to the buildplate we highly recommend to use a buildTak plate. More information on printing nGen_FLEX material can be found: ngen-flex.colorFabb.com/how

Reviews
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags
Tags
Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

Tips & Tricks

At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

Adviced 3d printing temperature:
240-260C

Adviced 3d print speed:
40 - 60 mm/s

Advised Heated bed
80C + buildTak

Build platform
nGen_FLEX gives best results on a buildTak covered buildplate, heated at around 80C. Make sure the distance between nozzle and buildplate is not too close, first layer should not be squeezed too much.

Specifications

Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.

Material: 
colorFabb nGen_FLEX
Diameter Tolerance:
± 0.1 mm
Density: 
1.13 g/cm3
Temperature resistance:
130C