NGEN LIGHT BLUE

The blue stuff. The color of a cloudless summer sky.

Only 158 left
 
Product Name Qty
NGEN LIGHT BLUE 1.75 / 2200 0
NGEN LIGHT BLUE 2.85 / 2200 0
NGEN LIGHT BLUE 1.75 / 750 102
NGEN LIGHT BLUE 2.85 / 750 56

Availability: In stock

Excl. Tax: €29.71 Incl. Tax: €35.95
  • Buy 4 for €26.74 (€32.36 incl. tax) each and save 10%
  • Buy 8 for €25.26 (€30.56 incl. tax) each and save 15%

* Required Fields

Details
Details
The blue stuff. The color of a cloudless summer sky. Perfectly suited for toys and all other printed objects that need to stand out from the crowd. We can assure you a fantastic looking print when using this light blue.

Reviews
Customer Reviews (2)
Strange behavior compared to samples
Quality
I ordered a pack of three samples (dark green, grey, dark blue) and liked the prints I was getting, so then ordered a full roll of light blue. It seems to need a much lower temperature than the other samples. They printed reliably at 220 on a 80 PrintBite bed. The new sample gives surfaces that look like they oozed (presumably still molten for too long) unless I bring the temperature all the way down to 195. Makes me wonder if the roll was mislabelled - it behaves more like PLA/PHA. Review by David (Posted on 1/2/2017)
Nice surface
Quality
Ngen blue used for Pokemon, it makes a nice surface, extruding so fine. It is strong too!! Review by Wim (Posted on 10/7/2016)
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags
Tags
Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

Tips & Tricks

At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

Adviced 3d printing temperature:
220-240C

Adviced 3d print speed:
40 - 70 mm/s

Advised Heated bed
75-85C

Build platform
nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.

Specifications

Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.

Material: 
colorFabb nGen
Diameter Tolerance:
± 0.05 mm
Density: 
1.20 g/cm3
Glass Transition Temperature:
85C