More Views


This is not an off-white color, but the most intense white we could achieve.

Only 46 left
Product Name Qty
NGEN WHITE 1.75 / 2200 6
NGEN WHITE 2.85 / 2200 9
NGEN WHITE 1.75 / 750 31
NGEN WHITE 2.85 / 750 0

Availability: In stock

  • Buy 4 for €32.36 each and save 10%
  • Buy 8 for €30.56 each and save 15%

* Required Fields

More Fabulous Colors



Like fresh winter snow, this white is pure and bright. For high quality prints that need to show every detail, this white does the job. This is not an off-white color, but the most intense white we could achieve.


Customer Reviews (1)

Excellent functional MaterialReview by Ed
If PLA is cheaper and excellent for my iteration development process, nGEN filament is for me often the final functional material for, housings, covers, etc.
Nice shiny material and does the job for me from 0.2 - 0.35 layer height.
Eventually clogging the hot-end I did eliminate completely having the filament running through a sponge just before entering the extruder. The sponge is lightly soaked (once a week two or three drops) in sewing machine oil. With this I keep the filament clean and a little slippery in the hot-end throat
(Posted on 8/8/2016)

Write Your Own Review

Only registered users can write reviews. Please, log in or register



Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

Tips & Tricks

At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

Adviced 3d printing temperature:

Adviced 3d print speed:
40 - 70 mm/s

Advised Heated bed

Build platform
nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.


Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.

colorFabb nGen
Diameter Tolerance:
± 0.05 mm
1.35 - 1.37 g/cm3
Glass Transition Temperature: