colorFabb DPA-100

DPA-100 is a polyacrylate material which features the unique ability to dissolve in a mild alkaline solution. Unlike PVA our DPA-100 is less sensitive to moisture uptake and offers better shelf-life and print performance over time.


DPA-100 support material is engineered to match with a variety of materials which can’t be supported by PVA due to bad adhesion to the build material. DPA-100 shows strong adhesion to PETG, ABS, ASA, PC and PA materials.


DPA-100 can be dissolved in a mild alkaline solution, for this we recommend our users to use DPA Detergent.


Only 102 left
 
Product Name Qty
colorFabb DPA-100 1.75 / 500 46
colorFabb DPA-100 2.85 / 500 56

Availability: In stock

€145.20

* Required Fields

colorFabb
Details
Details

DPA-100 is a polyacrylate support material which features the unique ability to dissolve in a mild alkaline solution. Unlike PVA our DPA-100 is less sensitive to moisture uptake and offers better shelf-life and print performance over time.

DPA-100 support material is engineered to match with a variety of materials which can’t be supported by PVA due to bad adhesion to the build material. DPA-100 shows strong adhesion to PETG, ABS, ASA, PC and PA materials.

DPA-100 can be dissolved in a mild alkaline solution, for this we recommend our users to use DPA Detergent.

This means the DPA-100 is uniquely suited to match our co-polyester filament offering, nGen, colorFabb_XT, colorFabb_HT and PETG. DPA-100 is not recommended for use with PLA as build material due to the relatively high water temperature needed for dissolution.

Reviews
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags
Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Download
Tips & Tricks

At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our DPA-100 has been tested using various 3D printers, which has resulted in the following recommended settings.

 

Adviced 3d printing temperature:
230C-250C

Adviced 3d print speed:
40-80 mm/s

Advised Heated bed (if you have one, not strictly necessary):
90-110C

Cooling fan:
Use the least amount of cooling for best adhesion between layers of support material. For better overhang performance use 0-50 cooling.

 

For a complete tutorial on how to print with colorFabb DPA-100, click here. [https://learn.colorfabb.com/how-to-print-with-dpa-100/]

Specifications

Material:
Colorfabb DPA-100

Diameter Tolerance:
± 0.05 mm

Density:
1,1 g/cm3

Glass Transition Temperature:
112C

For more information please visit colorFabb.com/materials