NGEN BLUE TRANSPARENT

At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

Adviced 3d printing temperature:
220-240C

Adviced 3d print speed:
40 - 70 mm/s

Advised Heated bed
75-85C

Build platform
nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.

For some materials we have a made learn.colorfabb.com article.

Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.

Material: 
colorFabb nGen
Diameter Tolerance:
± 0.05 mm
Density: 
1.20 g/cm3
Glass Transition Temperature:
85C