NGEN DARK GREEN
A lush and full green color uniquely suited for printing parts that require a more formal and classical look.
|NGEN DARK GREEN 1.75 / 750||29|
|NGEN DARK GREEN 2.85 / 750||11|
Availability: In stock
- NGEN dark green filament review
The following settings where used on a CEL Robox printer:
Bed: 75 C
Bed (1st layer): 80 C
Nozzle (1st layer): 235 C
Nozzle: 230 C
Ambient: 35 C
Filament: 1.75 mm
Filament multiplier: 0.95
Feed rate multiplier: 1.00
Fine setting (100 um layer height)
Print support material: Auto
Brim (perimeters): Off
Fill density (%): 40%
(Posted on 12/9/2015)
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
Adviced 3d printing temperature:
Adviced 3d print speed:
40 - 70 mm/s
Advised Heated bed
nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.
For some materials we have a made learn.colorfabb.com article.
Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.
± 0.05 mm
Glass Transition Temperature: