NGEN_LUX DIAMOND BLACK

Stylish and luxurious, our Diamond Black looks like diamond dust has used during the production of this filament. A beautiful black is combined with a rich shade of sparkles, resulting in the ultimate black filament.




Only 78 left
 
Product Name Qty
NGEN_LUX DIAMOND BLACK 1.75 / 750 26
NGEN_LUX DIAMOND BLACK 2.85 / 750 52

Availability: In stock

€49.95

* Required Fields

colorFabb
Details
Details
Stylish and luxurious, our Diamond Black looks like diamond dust has used during the production of this filament. A beautiful black is combined with a rich shade of sparkles, resulting in the ultimate black filament.
Reviews
Customer Reviews (2)
Easy to print on PEI
Quality
The finish after print is superb. Good adhesion on PEI bed with start temperature of 95C for first layer. After that I lower bed temp to 85C. Extrusion results good at 230C Review by Rob (Posted on 9/23/2019)
Not really black
Quality
Very bling bling but not really that black. I also seem to be getting different colors from the very same roll, with the same gcode, in same ambient temps and such. Bad patch maybe?

NOTE: there might be some wrong information on the suggested printing temperatures for this filament. 220-240C is really too low. Also, the box I got the roll in had a sticker with suggestion of 250-280C (and bed 100-120C!).
Review by JTa (Posted on 7/5/2019)
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags
Tags
Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

Tips & Tricks

At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

Adviced 3d printing temperature:
220-240C

Adviced 3d print speed:
40 - 70 mm/s

Advised Heated bed
75-85C

Build platform
nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.

 

 

For some materials we have a made learn.colorfabb.com article.

Specifications

Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.

Material: 
colorFabb nGen
Diameter Tolerance:
± 0.05 mm
Density: 
1.20 g/cm3
Glass Transition Temperature:
85C