This radiant and pretty pink makes every print look happy and friendly. The pink will stand out in your collection with its intense presence.
|NGEN PINK 1.75 / 2200||0|
|NGEN PINK 2.85 / 2200||0|
|NGEN PINK 1.75 / 750||41|
|NGEN PINK 2.85 / 750||42|
Availability: In stock
- Buy 4 for €32.36 each and save 11%
- Buy 8 for €30.56 each and save 15%
- So close to perfect
The Ngen is much easier to print with compared to the old XT and the surface has a very nice sheen, the only thing that is with the material is that it still lacks behind ABS in terms of physical properties.
That is however advised by CFabb, I use this for my GFs quadchopter and it works perfect. If you can improve the durability to that of ABS you will have a clear winner here!!!
-Mike (Posted on 12/30/2015)
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
Adviced 3d printing temperature:
Adviced 3d print speed:
40 - 70 mm/s
Advised Heated bed
nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.
For some materials we have a made learn.colorfabb.com article.
Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.
± 0.05 mm
Glass Transition Temperature: