School bus yellow, that should say it all. Quite a dark yellow with good depth of color.
|NGEN YELLOW 1.75 / 2200||0|
|NGEN YELLOW 2.85 / 2200||0|
|NGEN YELLOW 1.75 / 750||58|
|NGEN YELLOW 2.85 / 750||76|
Availability: In stock
- Buy 4 for €26.74 (€32.36 incl. tax) each and save 11%
- Buy 8 for €25.26 (€30.56 incl. tax) each and save 15%
- It's OK
I was expecting great results with this filament, I normally use PLA and and read this was supposed to be a better version of PLA. It printed great, no odor, but both of my prints are very brittle. I printed a couple of 2 in Pokemon, one the tail broke rather quick, the other one I was scraping a little residue off with my finger nail and the ear snapped off. These where not thin prints. Overall it worked great except my prints are very brittle (Posted on 12/13/2016)
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
Adviced 3d printing temperature:
Adviced 3d print speed:
40 - 70 mm/s
Advised Heated bed
nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.
Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.
± 0.05 mm
Glass Transition Temperature: