Detalles

PA (polyamide) filaments by colorFabb enable users to start printing truly functional parts. By enhancing the best possible PA in the market with custom developed additives we offer high-end 3D printing filament for pro users and engineers.

Especificación
Material: 
Colorfabb PA-CF Low Warp
Diameter Tolerance:
± 0.1 mm
Density: 
1.4 g/cm3
Continuous service temperature:
120C
Consejos de impresión

At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our grade of PA has been tested using various 3D printers, which has resulted in the following recommended settings.

Advised 3D printing temperature 
260C-280C
Advised 3d print speed
30 - 40 mm/s
Advised Heated bed 
ambient - 50C
For heated glass plate buildsurface we can recommend using 3DLac for extra adhesion.
Cooling fan
50% fan cooling is a good starting point, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.

 

Descargas
Soporte

Do you have any questions and / or comments?

Reply within one working day

Información del contacto

Mensaje

Reseñas

PA-CF low warp

El PA-CF Low Warp es una formulación única de poliamida con la capacidad de imprimir casi sin deformaciones en plataformas de construcción sin calentamiento. Las impresiones con un relleno bajo salen perfectamente planas en una superficie fría, mientras que para impresiones con un relleno más alto, una temperatura de 40/50°C es suficiente para obtener impresiones planas.

  • De alta resistencia
  • Resistencia a altas temperaturas
  • Fibra de carbono infundida
Colors
Tan bajo como € 87,71 € 72,49
Disponible
Sólo queda %1
SKU
060001
In Stock: make selection
Back to top