Innovation never stops at colorFabb. Our ever expanding range of special filaments have been industry leading for years. Some of them are for aesthetic purposes, others are pure functionality or for specific niche applications. Materials like woodFill, bronzeFill, XT-CF20, LW-PLA, varioShore TPU and DPA-100 support filament were developed in-house and have been successes ever since. By listening to our customers’ needs and forging strategic partnerships with material OEMs we are able to innovate continuously and bring FDM/FFF 3D printing to the next level.

Please note that most materials have specific printing instructions. Consult the individual article pages for more information.

colorFabb bronzeFill - PLA/PHA + fine bronze powder
Diameter Tolerance:
± 0.05 mm
3.9 g·cm-3

Glass Transition Temperature:

Conseils d'impression

At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and tricks for using colorFabb 3d printing filament.

Advised 3D printing temperature 
Advised 3d print speed
40 - 100 mm/s

Advised Heated bed 

Cooling fan

TIP! Depending on your set-up, 3d printer and slice software, you might see that bronzeFill needs a bit more flow compared to your normal PLA settings. Most plastics will show die swell when coming out of the nozzle tip, this is counteracted with specific slicer settings. Since bronzeFill doesn’t show a die swell such as PLA you might need to increase flow rate a bit, 4-8% was perfect for our UM2. UM original did not need any adjustments.

TIP! Sanding and polishing your parts will make the bronze particles shine. Start sanding with grit 120-180 and make sure all the printed lines vanish. You’ll notice that because bronzeFill is easy to sand down, careful you won’t loose too much detail. Then start working your way up by following with grit 240-320 and finishing off with grit 600 - or higher. Finally we used a clean soft cloth and some copper polish to really get all of the shine out of the bronze particles.


Avez-vous des questions et/ou des commentaires?

Réponse dans un délai d'un jour ouvrable





Le premier du genre : un filament avec du métal réel, aussi fortement dosé que physiquement possible, pour l'impression 3D FDM/FFF. Avec bronzeFill, vous avez entre les mains un filament d'impression 3D qui étonne. Non seulement son aspect et sa sensation, qui transforment votre impression en œuvre d'art, mais aussi son poids, qui est environ trois à quatre fois plus lourd que le PLA standard. Basé sur notre formulation PLA/PHA, bronzeFill a une finition mate, presque frittée au laser. Ce n'est que lorsque vous le polissez ou utilisez une autre méthode de post-traitement que vous le faites vraiment briller et que vous transformez votre impression en une pièce qui, selon un certain archéologue, mérite sa place dans un musée.

Les utilisateurs ont imprimé des exemples très intéressants, comme  Octolamp et un ancient Greek helmet

  • Bronze
  • Heavy
  • Polish-able Metal Look
À partir de € 53,83 € 44,49
En stock
Plus que %1 en stock
In Stock: make selection

Check full stock

Back to top