Diese Website benötigt Cookies, um alle Funktionen bereitzustellen. Durch die Nutzung unserer Website stimmen Sie der Verwendung von Cookies zu - Erfahren Sie mehr - Verberge diese Nachricht
Details

PA Neat. A brand new unfilled, heat resistant, low warp PA

PA Neat is our new highly functional polyamide (nylon) grade. PA NEAT allows continues use at 120°C while retaining sufficient mechanical properties and thus highly temperature resistant and tough. This makes it a perfect material for the professional user to make durable prints that need to perform.

PA Neat barely warps and is thus ideally suited for professional users who need their filament to perform.

 

Due to high stiffness of 2.85mm filament we recommend users to use spoolmounts which have some friction between spool and holder, to prevent unspooling of filament.

The filament may absorb moisture from the environment. If absorbed moisture levels are too high, users will see excessive oozing of material on travelmoves and rough outer surface of printed parts. Drying is advised using filament dryers, drying temperature set at 70-80C for 4-6 hours.

Specification
Material: 
Colorfabb PA NEAT
Diameter Tolerance:
± 0.1 mm
Density: 
1.14 g/cm3
Glass Transition Temperature:
65C
Printing Advice

At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our grade of PA has been tested using various 3D printers, which has resulted in the following recommended settings.

Adviced 3D printing temperature 
265C-290C
Adviced 3d print speed
30 - 40 mm/s
Advised Heated bed 
ambient - 50C
For heated glass plate buildsurface we can recommend using 3DLac for extra adhesion.
Cooling fan
0% fan cooling is adivesed to achieve best possible layer to layer adhesion. If a geometry needs cooling a maximum fo 50% regular fan speed is advised.

 

Downloads
Kundendienst

Haben Sie Fragen und / oder Kommentare?

Antworten  innerhalb ein Arbeitstag

Contact information

Message

Rezensionen

PA NEAT

PA Neat. A brand new unfilled, heat resistant, low warp PA

PA Neat is our new highly functional polyamide (nylon) grade. PA NEAT allows continues use at 120°C while retaining sufficient mechanical properties and thus highly temperature resistant and tough. This makes it a perfect material for the professional user to make durable prints that need to perform.

PA Neat barely warps and is thus ideally suited for professional users who need their filament to perform.

 

Colors
Ab € 60,25 € 49,79
Auf Lager
Nur noch %1 verfügbar
SKU
060002
In Stock: make selection

Check full stock

Back to top