Diese Website benötigt Cookies, um alle Funktionen bereitzustellen. Durch die Nutzung unserer Website stimmen Sie der Verwendung von Cookies zu - Erfahren Sie mehr - Verberge diese Nachricht

colorFabb LW-PLA

Reduce the weight of printed parts up to 65% compared to regular PLA.

Control extruded volume of material by regulating printing temperature. At around 230C LW-PLA starts foaming and can increase its volume by nearly 3 times.

With one spool LW-PLA you can print as much as with 3 regular spools of PLA, due to the 3x lower material multiplier / flow.

Easy to cut, trim, sand and takes paint really well.

LW-PLA  (Natural,Black,Gray Silver & Red) hides layer lines really well.

 Material oozes on travelmoves, this is normal and can’t be reduced completely.

 Color will turn lighter when material is at maximum foamed state as opposed to non-foamed state which shows a deeper and richer color.

This is what our customer are saying about this material:
-“…Must have material for RC planes! Light, easy to print, can cut and trim, too”
-"...LW-PLA, it’s perhaps the most ingenious 3D printer filament on the market."
-“…So far I have used this for cosplay and the weight reduction is amazing”
-“...This filament creates strong, lightweight parts with great surface finish and it sands very well (better than normal PLA)”
-“…I've been using this filament for various decorative prints to be worn, and the weight reduction is a real advantage!”
-..”Ideal for Drone replacement parts”

colorFabb LW-PLA
Diameter Tolerance:
± 0.1 mm

1.210-1.430 g·cm-3 (non activated density)

0.403 – 0,476 g·cm-3 (maximum activated density)

Glass Transition Temperature:
Printing Advice

At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and tricks for using colorFabb 3d printing filament.

Adviced 3D printing temperature 
Adviced 3d print speed
40 - 100 mm/s
Advised Heated bed 

(if you have one, not strictly necessary):


Cooling fan




Haben Sie Fragen und / oder Kommentare?

Antworten  innerhalb ein Arbeitstag

Contact information




Unser Rot Light Weight PLA (LW-PLA) ist das beste Filament zum Drucken von RC-Flugzeugen, Cosplay und anderen leichten Gegenständen. Die Teile sind federleicht, behalten jedoch eine gute Festigkeit und sind leicht zu schneiden, zu schneiden und zu schleifen. Wenn Ihnen das Gewicht des Teils wichtig ist, ist dies das Filament Ihrer Wahl.

Lesen Sie unser Tutorial: How to print with LW-PLA

Schau dieses Video an: Video CNC kitchen

  • Light Weight
  • Matte Finish
  • RC Planes
Ab € 32,05 € 26,49
Auf Lager
Nur noch %1 verfügbar
In Stock: make selection

Check full stock

Diese Artikel könnten Ihnen eventuell auch gefallen!
Back to top