Deze website vereist cookies om al zijn functies te bieden. Door onze website te gebruiken, gaat u akkoord met ons gebruik van cookies - Kom meer te weten - Verberg dit bericht
Gegevens

colorFabb speciale filamenten

Innovation never stops at colorFabb. Our ever expanding range of special filaments have been industry leading for years. Some of them are for aesthetic purposes, others are pure functionality or for specific niche applications. Materials like woodFill, bronzeFill, XT-CF20, LW-PLA, varioShore TPU and DPA-100 support filament were developed in-house and have been successes ever since. By listening to our customers’ needs and forging strategic partnerships with material OEMs we are able to innovate continuously and bring FDM/FFF 3D printing to the next level.

Please note that most materials have specific printing instructions. Consult the individual article pages for more information.

Specification
Material: 
colorFabb - PLA/PHA + fine steel powder
Diameter Tolerance:
± 0.05 mm
Density:
3,13g/cm3

Glass Transition Temperature:
55C

Printing Advice

At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

Adviced 3D printing temperature 
190-210C*
Adviced 3d print speed
40 - 80 mm/s

Advised Heated bed 
50-60C (if you have one, not strictly necessary)

Cooling fan
-

TIP! Steel nozzles
The high steel content of the steelFill material makes this filament quite abrasive to brass nozzles. It’s not as bad as the carbon fiber, XT-CF20 materials, but can effect the print quality after printing 1.5 kg. Therefore it’s recommended to print with abrasive resistant nozzles, for instance the E3D hardened steel nozzle, the JET RSS50 and performance 3-d Hercules nozzles.

Downloads
Ondersteuning

Heeft u vragen en/of opmerkingen?

Antwoord binnen één werkdag

Reviews

STEELFILL

“Steel yourself!” Met steelFill geef je je print een hele stoere en glanzende metal look. Met nabewerkingen zoals schuren en polijsten kun je het er echt speciaal uit laten zien, als een onderdeel dat in een metaalwerkplaats is gesmeed. steelFill heeft lichte magnetische eigenschappen.

Let op: het hoge staalgehalte van het steelFill-materiaal maakt dit filament vrij abrasief voor messing nozzles. Daarom wordt aanbevolen om te printen met schuurbestendige spuitmonden, bijvoorbeeld de E3D-spuitmond van gehard staal, de JET RSS50 en hoogwaardige 3-d Hercules-spuitmonden.

Lees meer over printen met steelFill en bekijk enkele geweldige voorbeelden door hier te klikken.

 

  • Steel
  • Heavy
  • Slightly Magnetic
Colors
Vanaf € 49,95
Op voorraad
Nog %1 beschikbaar
SKU
030008
In Stock: make selection

Check full stock

Back to top