Pinch to zoom

Skip to the beginning of the images gallery

nGen_FLEX is best described as a semi-flexible filament with a shore hardness of 95A. It can be fed through a Bowden tube and printed at regular speeds. It is temperature resistant to about 125C. This means that printed objects can be steam sterlilized at 121C. Not clear as in transparent, but clear in that it is a pure un-colored nGen_FLEX filament. No additions and no substitute!

Specification

Printing Advice

At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

Advised 3D printing temperature
240-260C

Advised 3d print speed
40 - 60 mm/s

Advised Heated bed
80C + buildTak

Cooling fan
nGen_FLEX gives best results on a buildTak covered buildplate, heated at around 80C. Make sure the distance between nozzle and buildplate is not too close, first layer should not be squeezed too much.

Downloads

Support

Do you have any questions and / or comments?

Reply within one working day