This is the natural material, no additives. When printed with proper flow and temperature good transparency can be obtained.
|HT CLEAR 1.75 / 700||43|
|HT CLEAR 2.85 / 700||47|
|HT CLEAR 1.75 / 2000||9|
|HT CLEAR 2.85 / 2000||7|
Availability: In stock
Regular Price: €44.95
Special Price €33.71
- High temp skin for a high powered rocket
Printed a rocket designed to fly to 4 kilometers. Using an Ultimaker 2+ extended, it was printed in sections, 10 cm diameter at it's thickest, and when assembled around a core, about 2 1/2 meters tall.
The challenge of this type of rocket is the heat generated flying at mach 1.5, which melts PLA pretty qhickly. HT co-polyester holds up well enough, even at the leading edges of the fins. Opens a lot of possibilities.
Had some slight warping issues at the outer edges of some large sections, which could be easilly compenstaed for in the assembly. The "clear" is more of a translucent, showing off the 3D cubic fill pattern now available in the Cura slicer. Nice effect. (Posted on 12/26/2017)
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
Adviced 3d printing temperature:
Adviced 3d print speed:
30 - 50 mm/s
Advised Heated bed
colorFabb_HT gives best results on a heated build platform, 100C to about 120C is usually needed for proper adhesion to a glass plate. When this is not enough it’s possible to use buildTak plate for stronger adhesion
For some materials we have a made learn.colorfabb.com article.
Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.
colorFabb_HT is enabled by Eastman Tritan™ copolyester technology
± 0.1 mm
Glass Transition Temperature: