A must for all portfolios and one of the most enduring colors. This black gives a silky smooth finish.
|HT BLACK 1.75 / 700||54|
|HT BLACK 2.85 / 700||20|
|HT BLACK 1.75 / 2000||10|
|HT BLACK 2.85 / 2000||10|
|HT BLACK 2.85 / 8000||0|
Availability: In stock
- Very Good Material
Printed with a Prusa i3 MK2.5 at 270C and a bed of 110C on Buildtek. It stuck well and removed easily. A negative is I had much stringing, whiskers, fuzz that had to be removed with a heatgun. No big deal, but you might want to consider a higher retraction distance. Otherwise a fine filament. (Posted on 9/1/2018)
- Easy to print and great strength
My first order of HT filament arrived today.
I unboxed it and made some testprints.
My initial settings on my Ultimaker 2 were 260C nozzle temperature and 100C HPB.
These objects were rather small. I have to find out if 100C will work with larger objects or that I will use the recommended 110-120C by Colorfabb.
First impression of the prints and print process is flawless. It prints with great ease and I experience a good and stable flow. Similar to normal PLA/PHA.
One piece of advise I will give, but it has nothing to do with the quality of the product, is be carefull and have a critical look using brims or support material.
Because of its strength, it doesn't come of as easily as PLA/PHA (Posted on 9/2/2016)
- Impressive strength and printability
I was looking for a stronger filament that could handle high temps for my prototype applications and HT is it! It makes very strong parts and layer adhesion is excellent. I thought it might be difficult to print with, but it works great on my Lulzbot Mini. I had a problem with warping at first, but I raised the bed temp and that fixed the problem. So if you need a strong filament for prototypes or industrial use, HT is a great choice. (Posted on 6/4/2016)
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
Adviced 3d printing temperature:
Adviced 3d print speed:
30 - 50 mm/s
Advised Heated bed
colorFabb_HT gives best results on a heated build platform, 100C to about 120C is usually needed for proper adhesion to a glass plate. When this is not enough it’s possible to use buildTak plate for stronger adhesion
For some materials we have a made learn.colorfabb.com article.
Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.
colorFabb_HT is enabled by Eastman Tritan™ copolyester technology
± 0.1 mm
Glass Transition Temperature: