You have no items in your shopping cart.
NGEN GRAY METALLIC
Look closer... You will see a subtle amount of metallic particles in this material, making it extra special for those who take extra care in their print.
“For best printing results we recommend drying the nGen Metallic colors. Filament drying has been successfully teste in our lab at 70C, 12-24h before printing.”
Only 63 left
| Product Name | Qty |
|---|---|
| NGEN GRAY METALLIC 1.75 / 2200 | 0 |
| NGEN GRAY METALLIC 2.85 / 2200 | 0 |
| NGEN GRAY METALLIC 1.75 / 750 | 29 |
| NGEN GRAY METALLIC 2.85 / 750 | 34 |
Availability: In stock
Regular Price: €35.95
Special Price €28.76
Related
Details
Details
Look closer... You will see a subtle amount of metallic particles in this material, making it extra special for those who take extra care in their print. It makes for a surprising effect unseen in many gray colors.
“For best printing results we recommend drying the nGen Metallic colors. Filament drying has been successfully teste in our lab at 70C, 12-24h before printing.”
Reviews
Customer Reviews (1)
- Spot on CoPo
-
Easy to dial in, delivering good results without needing extensively balanced pre-sets, almost out-of-the-box. Looks of this slightly metallic and half matte filament is quite nice, taking the dull out of the grey.Quality
Tip
If stringing appears, test with a smaller nozzle before tinkering with retraction and Z-Hop. To counter production time, lowering the amount of perimeters to three delivered us nevertheless tough mid-sized prints for functional use.
Note
Star #5 can be gained if the filament is wound less tightly and a bit more evenly to prevent sudden under extrusion. (Posted on 12/14/2017)
Tags
Tips & Tricks
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
Adviced 3d printing temperature:
220-240C
Adviced 3d print speed:
40 - 70 mm/s
Advised Heated bed
75-85C
Build platform
nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.
For some materials we have a made learn.colorfabb.com article.
Specifications
Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.
Material:
colorFabb nGen
Diameter Tolerance:
± 0.05 mm
Density:
1.20 g/cm3
Glass Transition Temperature:
85C
Download
