NGEN DARK GRAY
This intense and dark gray gives your print a style that is undeniable. This dark grey is the very popular RAL 7043, used for many applications
|NGEN DARK GRAY 1.75 / 2200||6|
|NGEN DARK GRAY 2.85 / 2200||8|
|NGEN DARK GRAY 1.75 / 750||51|
|NGEN DARK GRAY 2.85 / 750||62|
Availability: In stock
- Buy 4 for €32.36 each and save 11%
- Buy 8 for €30.56 each and save 15%
- Smoothest printing experience so far!
I bought my (Rostock, long bowden) printer secondhand, and got a bunch of unlabeled filament with it. That was a big disaster, and soon I started ordering different brands of filament, all with their quirks. Until I found nGen. I can print it at 175C and it has virtually no strings. It does not warp and is structurally stiffer than PLA I think (I can not measure that, so somewhat subjective). So, nGen became my "go-to" filament. Today I picked up some translucent "Christmas" colors to see how that goes. Thanks for the tour of the factory! (Posted on 11/21/2018)
- First print Ngen
I printed parts for a spring motor rolling following the instructions of Colorfabb. The pieces were very good.
Printer: Sethi3D S3 (Posted on 8/2/2018)
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
Adviced 3d printing temperature:
Adviced 3d print speed:
40 - 70 mm/s
Advised Heated bed
nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.
For some materials we have a made learn.colorfabb.com article.
Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.
± 0.05 mm
Glass Transition Temperature: