PA NEAT

PA Neat. A brand new unfilled, heat resistant, low warp PA


PA Neat is our new highly functional polyamide (nylon) grade. PA NEAT allows continues use at 120°C while retaining sufficient mechanical properties and thus highly temperature resistant and tough. This makes it a perfect material for the professional user to make durable prints that need to perform.


PA Neat barely warps and is thus ideally suited for professional users who need their filament to perform.


Due to high stiffness of 2.85mm filament we recommend users to use spoolmounts which have some friction between spool and holder, to prevent unspooling of filament.


The filament may absorb moisture from the environment. If absorbed moisture levels are too high, users will see excessive oozing of material on travelmoves and rough outer surface of printed parts. Drying is advised using filament dryers, drying temperature set at 70-80C for 4-6 hours.

Only 48 left
 
Product NameQty
PA NEAT 1.75 / 7500
PA NEAT 2.85 / 75048

Availability: In stock

Excl. Tax: €49.55 Incl. Tax: €59.95

* Required Fields

colorFabb
XL Spools (2, 2.2, 4.5, 8 KG)

* XL Spools are made to order, each item will have it's own lead-time.

Check stock level first!.

Color on Demand

All Color on Demand filaments are made to order. Place your order and we’ll get to work. We normally produce within 5 business days and ship your order then. Need it sooner?

Contact us!

Details
Details

PA Neat. A brand new unfilled, heat resistant, low warp PA

PA Neat is our new highly functional polyamide (nylon) grade. PA NEAT allows continues use at 120°C while retaining sufficient mechanical properties and thus highly temperature resistant and tough. This makes it a perfect material for the professional user to make durable prints that need to perform.

PA Neat barely warps and is thus ideally suited for professional users who need their filament to perform.

Due to high stiffness of 2.85mm filament we recommend users to use spoolmounts which have some friction between spool and holder, to prevent unspooling of filament.

The filament may absorb moisture from the environment. If absorbed moisture levels are too high, users will see excessive oozing of material on travelmoves and rough outer surface of printed parts. Drying is advised using filament dryers, drying temperature set at 70-80C for 4-6 hours.

Reviews
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags
Tags
Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

Tips & Tricks

Tips & tricks

At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our grade of PA NEAT Low Warp has been tested using various 3D printers, which has resulted in the following recommended settings.

 

Adviced 3d printing temperature:
265C-290C

Adviced 3d print speed:
30 - 40 mm/s

Advised Heated bed (if you have one, not strictly necessary):
ambient - 50C

For heated glass plate buildsurface we can recommend using 3DLac for extra adhesion.

Cooling fan
0% fan cooling is adivesed to achieve best possible layer to layer adhesion. If a geometry needs cooling a maximum fo 50% regular fan speed is advised.

 

For some materials we have a made learn.colorfabb.com article.

Specifications

Material:
Colorfabb PA NEAT

Diameter Tolerance:
± 0.1 mm

Density:
1.14 g/cm3 

For more information please visit colorFabb.com/materials-data