A must for all portfolios and one of the most enduring colors. This black gives a silky smooth finish.
|NGEN BLACK 1.75 / 2200||15|
|NGEN BLACK 2.85 / 2200||11|
|NGEN BLACK 1.75 / 750||112|
|NGEN BLACK 2.85 / 750||183|
Availability: In stock
Regular Price: €35.95
Special Price Excl. Tax: €24.75 Incl. Tax: €29.95
- My goto Filament
Its just the perfect Filament for me! never had any troubble with it not sticking to the bed or it clogging my nozle. Did order a Sample-pack with all the colours and must say they just look beautiful. layer lines are barely visible on fine prints (0.1) and the Overall print has a nice shine to it. I can just recomend this to everyone who loves the easy printability of PLA but needs a bit more strenght. (Posted on 12/25/2016)
Printing as easy as PLA, but with better material properties, it seems to good to be true. But hell yeah, it is true. It prints super easy, it sticks nice to the bed and layers are less visible than on PLA prints. Do not hesitate, just buy, you won't regret! (Posted on 12/13/2016)
- Practice makes perfect
I had ordered a sample of this stuff. Coming from pla I had trouble getting ngen to stick on the aluminium heatbed. After adding some sprayglue it stuck like butter and prints very very nice. Its really strong and smooth (Posted on 11/24/2016)
- I don't use PLA or ABS anymore...
nGen is very predictable and strong. Great quality. I'll just pile on to the other 5 star reviews. This is my go to filament. Heated bed 85C, nozzles 230C, I use Gizmo Dorks 6" bed tape for an easy quick release. (Posted on 8/4/2016)
- My go to Filament!
nGen is always my "go to" filament. It just prints beautifully. It's strong, handles heat well, reliable, and just looks great. I never worry about how it's going to turn out. I print with black, dark gray, dark green, dark blue, and red and never have to change the settings. I use a lot of different types of filament, but for critical prototyping nGen can't be beat! (Posted on 3/16/2016)
- Really easy to print
this stuff printed perfectly with the recomended settings. Glossy black prints and at 0.2 layer height the prints are really sturdy and durable. Don't let the price fool you, you might pay more per gram but you need way less grams per print ( I used to print 3 perimeters printing pla, with ngen only 2 and I think 5% less infill). Will definitlty order again ! (Posted on 1/28/2016)
- The best black there is for a UM2
I have always struggled printing with black PLA, the balance between temperature and speed is so tight and you have to constantly monitor the print, but, not any more. I initially had a little lifting of a 0.4mm bottom layer wall, but knocking the bed temperature up to 85C fixed that. No lifting of larger surfaces either - mirror surface edge to edge.
I also started printing NGEN at 240C based on what I had learned with XT but dialed that back to 230 because of the stringing and spider web that appeared at the end of the print. I was also very happily surprised that the same settings seem to work well for Black, Clear, Purple and gold.
I think I'm an NGEN convert and I'm not phased by printing in black any more. (Posted on 12/21/2015)
At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.
Adviced 3d printing temperature:
Adviced 3d print speed:
40 - 70 mm/s
Advised Heated bed
nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.
Since colorFabb develops and produces their own filaments we have a lot of knowhow about our materials. Here you’ll find all kinds of interesting material specifications that will help you decide which material is best for your project.
± 0.05 mm
Glass Transition Temperature: