This website requires cookies to provide all of its features. By using our website, you agree to our use of cookies - Learn more - Hide this message
Details

colorFabb special filaments

Innovation never stops at colorFabb. Our ever expanding range of special filaments have been industry leading for years. Some of them are for aesthetic purposes, others are pure functionality or for specific niche applications. Materials like woodFill, bronzeFill, XT-CF20, LW-PLA, varioShore TPU and DPA-100 support filament were developed in-house and have been successes ever since. By listening to our customers’ needs and forging strategic partnerships with material OEMs we are able to innovate continuously and bring FDM/FFF 3D printing to the next level.

Please note that most materials have specific printing instructions. Consult the individual article pages for more information.

Specification
Material: 
colorFabb XT-CF20
Diameter Tolerance:
± 0.05 mm
Density:
-

Glass Transition Temperature:
80C

Printing Advice

At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

Adviced 3D printing temperature 
240-260C
Adviced 3d print speed
40 - 70 mm/s

Advised Heated bed 
60-70C

Cooling fan
-

TIP! For colorFabb_XT we advice to print on a heated bed. After printing, the build plate needs to cool down to about 20-30 C at which point you can remove the printed part. 

Support

Do you have any questions and / or comments?

Reply within one working day

Reviews

XT-CF20

Based on colorFabb_XT, XT-CF20 is a carbon fiber composite material. Loaded with no less than 20% specially sourced carbon fibers we have developed a very stiff and tough 3D printing filament made for functional parts. It is truly a professional printers go-to material, especially for users looking for high melt strength, high melt viscosity and good dimensional accuracy and stability.

Please note: A special point of attention is the abrasive nature of the carbon fibers. In general these fibers will accelerate the nozzle-wear of brass nozzles, much faster than unfilled filaments. We recommend to use from stainless steel nozzles or nozzles made with hardened copper alloys.

from €49.95
In stock
SKU
020012
In Stock: make selection

Check full stock

Back to top