IGUS IGLIDUR I150

3D printer filament: iglidur® |150-PF
 
Components made of igus® Tribo-Filament are up to 50 times more wear-resistant than standard materials for 3D printing and therefore have an extremely long service life. Due to their excellent tribological
properties, they are suited for 3D printing of replacement parts, for example bearings, drive nuts, gears and other wear parts. The igus® Tribo-Filaments can be processed on 3D printers that are based on the fused-deposition-modelling method (FDM/FFF) and that allow the nozzle temperature to be set as required.

Only 29 left
 
Product Name Qty
IGUS IGLIDUR I150 1.75 / 750 9
IGUS IGLIDUR I150 2.85 / 750 20

Availability: In stock

€56.68

* Required Fields

igus
Details
Details

3D printer filament: iglidur® |150-PF
 
Components made of igus® Tribo-Filament are up to 50 times more wear-resistant than standard materials for 3D printing and therefore have an extremely long service life. Due to their excellent tribological
properties, they are suited for 3D printing of replacement parts, for example bearings, drive nuts, gears and other wear parts. The igus® Tribo-Filaments can be processed on 3D printers that are based on the fused-deposition-modelling method (FDM/FFF) and that allow the nozzle temperature to be set as required.  
 
Typical application areas

  • Special machine construction
  • Jig construction
  • Complex wear parts


igus® adhesive film is required for a non-heated print bed.

Reviews
Write Your Own Review

Only registered users can write reviews. Please, log in or register

Tags
Tags
Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.

Specifications

Dimensions

filament diameter: 1.75 mm / 2.85 mm

Outer diameter spool: 205 mm

Inner diameter spool: 55 mm

Spool width: 55 mm


General properties

Colour: white

Material suitable for: Beginner

Max. moisture absorption (at 23 °C/73 °F, 50% r.h.): 0.3 Wt.-%, test method DIN 53495

Max. water absorption: 0.7 Wt.-%

Net weight: 250 g / 750 g

Flexural strength: 54 MPa


Physical and thermal properties

Max. long-term application temperature: 65 °C

Max. short-term application temperature: 75 °C

Lower application temperature: -30 °C

Max. recommended surface pressure (at +20 °C/68 °F): 24 MPa


Requirements

Mould-free according to DIN EN ISA 846 Procedure A: No


Processing instructions

Nozzle temperature (min.): 240 °C

Nozzle temperature (max.): 250 °C

Bed temperature (min.): 20 °C

Bed temperature (max.): 60 °C

Recommended adhesion: igus® adhesive film or glue stick on glas (Adhesive film imperative with non-heated pressure bed)

Construction space: No closed installation space necessary

Component cooling: A component cooling is not necessary, with cooling switched on it is also possible to print

Download