Details

colorFabb LW-PLA-HT Olive

Meet our new & improved LW-PLA-HT. This formulation features an increased temperature resistance compared to our original LW-PLA.

Thin printed structures will be able to handle heat from external sources such as the sun much better and prolong the time until failure. Not convinced? Check out our comparison video in the image gallery between regular LW-PLA and LW-PLA-HT.

Our LW-PLA-HT is the best filament for printing RC Planes, Cosplay and other light weight items. Parts are feather light, yet retain good strength and are easy to cut, trim and sand.

Read our tutorial: Switching from LW-PLA to LW-PLA-HT, what you need to know. 

Watch this video: Video CNC kitchen

Pros

better heat resistance compared to LW-PLA

print light weight parts due to active foaming process

darker colors are less prone to heat deformation

takes paint really well

Cons
slightly higher density at maximum foaming, compared to LW-PLA

you’ll have to adjust your LW-PLA gcodes to accommodate LW-PLA-HT

higher temperature resistance of the material can lead to more warping

 

Specification
Material: 
colorFabb LW-PLA-HT
Diameter Tolerance:
± 0.1 mm
Density: 

1.210-1.430 g·cm-3 (non activated density)

0.530 – 0,620 g·cm-3 (maximum activated density)

HDT:
71 C (unfoamed sample)
Printing Advice

For printing thin structures such as RC plane parts we recommend printing the first layer at 100% flow using 200C printing temperature. Then increase the temperature for the second layer (around 235C) to activate the foaming and reduce flow to 50-60%.

Advised 3D printing temperature 
195-240C
Advised 3d print speed
40 - 100 mm/s
Advised Heated bed 

(if you have one, not strictly necessary):

50-60C

Cooling fan

-

 

Downloads
Support

Do you have any questions and / or comments?

Reply within one working day

Contact information

Message

Reviews

LW-PLA-HT OLIVE GREEN

Meet our new generation LW-PLA-HT Olive. This formulation features an increased temperature resistance compared to our generic LW-PLA.

Thin printed structures will be able to handle heat from external sources such as the sun much better and prolong the time until failure. Not convinced? Check out our comparison video in the image gallery between regular LW-PLA and LW-PLA-HT.

Our LW-PLA-HT is the best filament for printing RC Planes, Cosplay and other light weight items. Parts are feather light, yet retain good strength and are easy to cut, trim and sand. 

Read our tutorial: Upgrading from LW-PLA to LW-PLA-HT, what you need to know. 

Watch this video: Video CNC kitchen

  • Light Weight
  • Temperature resistant
  • RC Planes approved
Colors
from €45.36 €37.49
In stock
Only %1 left
SKU
030032
In Stock: make selection
Back to top