PETG ECONOMY WHITE
PETG ECONOMY WHITE
|PETG ECONOMY WHITE 1.75 / 2200||16|
|PETG ECONOMY WHITE 2.85 / 2200||28|
|PETG ECONOMY WHITE 1.75 / 4500||0|
|PETG ECONOMY WHITE 2.85 / 4500||0|
|PETG ECONOMY WHITE 1.75 / 8000||0|
|PETG ECONOMY WHITE 2.85 / 8000||1|
Availability: In stock
- I would not use an other PETG filament
This PETG is giving very good results in term of adhesion. I am working on glass plate with 80°C on the bed and extrusion at 240°C without cooling.
Technical result is strong and appearance is very professionnal.
I am printing technical parts 300mm x 120mm without any problem after more than 40 successive prints (Posted on 5/8/2019)
- This stuff works
I have tried PETG from three other suppliers and this is the only one that delivers on layer adhesion. Whatever you are doing don't change it.
Supply on decent 8 kg rolls which I don't think any other supplier does.
Thanks for doing this.
(Posted on 4/27/2019)
- Best PETG filament that i have ever used!!
This filament prints incredibly well even on steep overhangs, on support or bridges. I did have a little bit of a problem with the adhesion, but this is a well known issue with petg. I just used some wood glue on tape and that works like a charm. Plus it looks great and it is strong.
You will be getting my personal compliments during esef 2018. (Posted on 3/8/2018)
- Good value for money!
These PETG rolls of filament (also bought a roll off black) are of excellent quality, material properties (virtually no stringing!) and very good to print once you found the optimum print settings. On my UM3E a bed temperature of 80 degC and 235 degC hotend temperature (+5 for the first layer) do an excellent job. (Posted on 1/9/2018)
At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our grade of Economy PETG has been tested using various 3D printers, which has resulted in the following recommended settings.
Adviced 3d printing temperature:
Adviced 3d print speed:
30 - 50 mm/s
Advised Heated bed (if you have one, not strictly necessary):
75/100% fan cooling for best aesthetics, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.
For some materials we have a made learn.colorfabb.com article.
Colorfabb PETG Economy
± 0.1 mm
Glass Transition Temperature:
For more information please visit colorFabb.com/materials-data