PLA ECONOMY BLACK
PLA ECONOMY BLACK
|PLA ECONOMY BLACK 1.75 / 2200||38|
|PLA ECONOMY BLACK 2.85 / 2200||19|
|PLA ECONOMY BLACK 1.75 / 4500||5|
|PLA ECONOMY BLACK 2.85 / 4500||8|
|PLA ECONOMY BLACK 1.75 / 8000||4|
|PLA ECONOMY BLACK 2.85 / 8000||5|
Availability: In stock
- Strongest PLA I have printed
This is by far the best PLA I have printed. It flows great, and it is STRONG. Printed on my Prusa MK3 I get close to the same strength as I got with some of my cheaper PETG (that actually was more expensive than this and their PETG economy). (Posted on 12/7/2018)
- Lovin It
Had the filament lying around for about 1 month then used it up in 2 weeks.
No problems printing with it on my Ultimaker Original + with an E3D V6 hotend at about 205°C nozzle 60°C bed.
I would recommend some kind of feet on the ultimaker to make room for the larger spool ;)
Just ordered 2 more spools... what more to say
Keep up the good work! (Posted on 3/7/2017)
- It prints and is cheap
Well. There's not a lot to say about this. It's a big spool of PLA. Put it in your printer and things come out the other end, and they look nice when they do. All the quality you expect and need really for printing lots of things! (Posted on 1/31/2017)
At colorFabb we have a well-equipped 3d printing studio with many popular 3d printers. Our grade of Economy PLA has been tested using various 3D printers, which has resulted in the following recommended settings.
Adviced 3d printing temperature:
Adviced 3d print speed:
40 - 100 mm/s
Advised Heated bed (if you have one, not strictly necessary):
100% fan cooling for best aesthetics, this gives best performance on overhangs and small details. For best mechanical performance try printing with the least amount of cooling needed, for optimal layer adhesion.
For some materials we have a made learn.colorfabb.com article.
Colorfabb PLA Economy
± 0.1 mm
Glass Transition Temperature:
For more information please visit colorFabb.com/materials