Specification
Material: 
colorFabb nGen
Diameter Tolerance:
± 0.05 mm
Density: 
1.20 g/cm3
Glass Transition Temperature:
85C
Printing Advice

At colorFabb we have a well equipped 3d printing studio with a lot of popular 3d printers. We know our materials will give you excellent results and to help you get these results here are tips and trick for using colorFabb 3d printing filament.

Advised 3D printing temperature 
220-240C
Advised 3d print speed
40 - 70 mm/s
Advised Heated bed 
75-85C
Cooling fan
nGen gives best results on a heated build platform, 75C to about 85C is usually needed for proper adhesion to a glass plate.
Printing on a cold bed is possible but you’ll need some adhesion tools to minimize warping. 3DLac, buildTak or 3DEeze can do the trick.

 

Downloads
Support

Do you have any questions and / or comments?

Reply within one working day

Contact information

Message

Reviews

NGEN BRIGHT DUTCH

Quite possibly the brightest of orange you have ever seen in the world or 3D printing filament. Great color if you want to build your own 3D printer, for instance a Voron or Prusa would look really good in this color.

  • FDA food contact compliance
  • Easy Printing
  • Multiple Colors
from €35.95 €29.71
In stock
Only %1 left
SKU
020060
In Stock: make selection

Check full stock

Back to top